Which of the following best describes a marine sanitation device MSD quizlet?

Which of the following best describes what a Marine Sanitation Device is? A system that collects or treats raw sewage.

Which of the following best describes a marine sanitation device MSD quizlet?

Which of the following best describes what a Marine Sanitation Device is? A system that collects or treats raw sewage.

What must type 3 marine sanitation device have when boating on inland waters?

To be clear, it is ILLEGAL to discharge UNTREATED sewage on inland waters and within 3 miles of shore. To legally dispose of sewage boaters must either have an on-board treatment device (Type I or Type II MSD) or a holding tank (Type III MSD) to hold the waste and have it pumped out ashore.

Which of the following is the recommended method for storing your personal flotation devices?

When you’re not on the water, you should store flotation devices in a cool dry area with adequate ventilation. Avoid placing them in direct sunlight, as UV rays could prove harmful to them. Hang them up whenever possible rather than placing them on a shelf or the bottom of a locker.

What is the main function of a boat trailer’s safety chains quizlet?

Two strong safety chains should be crisscrossed to support the trailer’s coupler if it becomes disconnected from the towing vehicle. The chains should be strong enough to hold the combined weight of the vessel, engine, and trailer. Secure the vessel on the trailer and the gear within the vessel.

Which of the following describes the term hull?

The body of a boat is called its hull. At the upper edges of the boat’s hull are the gunwales.

Which of the following is most likely to result in the swamping of a boat?

A boat is ‘swamped’ when it fills with water from over the side. Swamping can be caused by large waves coming over the gunwales or transom of your boat if it has been overloaded. If your boat has been swamped or is sinking, perform the following: Step 1) Ensure that everyone is wearing a lifejacket or PFD.

What describes a marine sanitation device?

For purposes of the CWA, an MSD is “any equipment for installation on board a vessel which is designed to receive, retain, treat, or discharge sewage, and any process to treat such sewage.” 33 U.S.C.

What must a Type 3 marine sanitation?

Type III is a device that prevents the overboard discharge of treated or untreated sewage or any waste derived from sewage. This type of device is typically a holding tank and may include other types of technology including incineration, recirculation, and composting.

What is a Type 1 marine sanitation device?

Type I is a an on-board treatment device using a physical/chemical based system that relies on maceration and chlorination. After treatment the treated waste can be discharged.

Which of the following is recommended for the general maintenance of your boat?

Before every voyage, take a minute to inspect all belts and hoses; replace any that are torn or show signs of excessive wear. Inspect all fluid levels, oil levels, and the condition of your battery before every voyage. Look for corrosion and oxidation and take preventative measures before they become a serious problem.

Which of the following is the most suitable place to store a Marine fire extinguisher?

Experts recommend storing your fire extinguishers in an upright position and mounted in an easily accessible place. You should keep them in rooms where fires are more likely to break out such as the hull, cabin, kitchen and bilge.

Which of the following is the safest use of a life jacket or PFD?

The best answer is: whenever you’re in or around the water, not just operating a boat. However, a PFD should be always be worn while boating, and especially when boating in dangerous conditions.

What is the main function of a boat trailer’s safety chains?

In other words, safety chains are an essential piece for making sure your trailer is properly connected to your tow vehicle. They are also necessary so that you can still safely guide your trailer and maintain control as make your way to a safe stopping point in the event that the event of a ball or coupler failure.

What is the best way to clean the hull of your vessel to protect the environment?

To protect the environment, use only environmentally safe, non-phosphate detergents to remove oil and algae from fiberglass hulls. Avoid abrasive materials, which can remove the shiny top layer (gel coat). Patch holes immediately with a fiberglass patching compound.

How does a responsible boater protect the shoreline quizlet?

Make sure the person meets the minimum age and boater education requirements. How does a responsible boater protect the shoreline? by preventing erosion. You are towing a skier behind your boat.

What does hull Type mean on a boat?

The ‘hull’ is the portion of your boat that rides both in and on top of the water. The boat hull does not include any masts, sails, rigging, machinery or equipment.

What is the hull of a boat made of?

The hull of a wooden boat usually consists of planking fastened to frames and a keel. Keel and frames are traditionally made of hardwoods such as oak while planking can be oak but is more often softwood such as pine, larch or cedar.

What part of a boat is the hull?

Hull: The body of the boat is called the hull. Keel: The structural backbone of a ship that runs along the bottom of the hull is called the keel. Port: When standing at the stern of the boat and looking to the bow, the side of the boat to your left is called the port side.