What is code 35 on a Thermo King unit?

Subject: Alarm Code 35 (Run Relay Circuit) on Microprocessor Units with Thermo. King Alternators. It is possible that the following units will fail the Full Pretrip Test and record Alarm Code 35 (Run Relay Circuit)

What does refrigeration capacity low mean?

Description: Refrigeration Capacity Low (Zone) Operator Action: Unit/zone cannot operate and is shut down.

How do I fix code 20 on a Thermo King?

Thermo King Alarm Code 20: Engine Failed to Start
Check the inline fuel filter, located in the transfer pump inlet hose fitting.Remove the bolt and washers.Remove the filter from inside the bolt and check for debris clogging the screen.Clean out the bolt, the screen, and the banjo fitting.

What is code 37 on a Thermo King?

37 CHECK ENGINE COOLANT LEVEL. 41 CHECK ENGINE COOLANT TEMP. 42 UNIT FORCED TO LOW SPEED. 43 UNIT FORCED TO LOW SPEED MODULATION.

What is code 17 on a Thermo King?

Code 17 means Engine Failed to Crank when start is requested by the Microprocessor. Check Starter (unfortunately lately new thermoking starters often fail for some reason). Fuel pull in Solenoid failed or its circuit.

What is alarm 63 Thermo King?

What is Code 63 on a Thermo King? Code 63 has a red status, which needs immediate action. It indicates that the engine or vapor motor stopped working. When there is too much heat in the exhaust system, engine, or ambient temperature, fuel may vaporize in the lines.

How do you know when a refrigerator is low on Freon?

Locate the refrigerator’s condenser and place your hand next to it to sense heat. If the condenser feels cold and the refrigerator has been running, there may be a lack or absence of Freon.

How do I know the capacity of my refrigerator?

Grab a tape measure and measure the width, depth and height of the inside of your refrigerator. Multiply the numbers together (W x D x H) and divide the total by 1728 to get the cubic feet. For example, if you have a refrigerator that measures 30″ wide by 30″ deep by 48″ high, you multiply 30 X 30 X 48.

How do you measure the capacity of a refrigerator?

Multiply the depth times the width times the height, and this will give you the cubic feet. One cubic foot is equivalent to 28.3 liters. So times you cubic feet x 28.3, and that will provide you with your refrigerator’s volume in liters.

How do I reset my Thermo King inverter?

If the power inverter is not supplying AC output power, press the RESET button on the GFCI receptacle all the way in to be sure the GFCI is not tripped. Be sure to press the RESET button all the way in. The Ground Fault Circuit Interrupter (GFCI) should be installed in a manner that protects all AC branch circuits.

How much fuel does an APU use per hour?

They generally burn between 0.1 and 0.5 gallons of fuel per hour depending on their design, the ambient temperature, the sleeper’s insulation, and the resulting HVAC load, along with the AC power being generated.