What is an important step in the boat fueling process?

Proper Fueling Procedures
Secure boat to the dock.Switch off engine.Extinguish all open flames.Do not use electrical switches.No smoking.Ports, hatches, and doors closed.Make certain all passengers are ashore.Determine quantity of fuel required and make sure it is the proper type of fuel.

What is an important step in the fueling process quizlet?

What is an important step in the fueling process? Turn off engine(s), Which of the following actions is the best to take when fueling an outboard boat with a portable tank? Always refill your portable fuel containers on the pavement or dock to ensure a good ground.

What should you do before fueling your boat?

Shut off all fuel valves and extinguish all open flames, such as galley stoves and pilot lights. Close all windows, ports, doors, and other openings to prevent fumes from entering the boat. Remove portable fuel tanks from the boat and fill them on the dock. Make sure that your fire extinguisher is within reach.

What should you do before fueling your boat quizlet?

What should you do before fueling your boat? Turn off the engine and close all windows, ports, doors, and other openings.

What is the first step to take after running aground?

Like any accident, the first step is to stop and assess the situation. So, stop the engine and check if anyone is seriously hurt. If the answer is yes, contact the authorities on your VHF radio and send out a distress signal right away to alert other boaters that you need help.

Which of the following actions is the best to take when fueling an outboard?

Turn off engine(s), electronics, and extinguish all open flames. Keep the nozzle in contact with the edge of the fill to prevent build up of static electricity to prevent sparking. Don’t top off your tank. Know how much fuel your tank holds and fill it to about 90%.

What does a marine pump out station do quizlet?

What does a marine pump out station do? pumps out on board holding tanks. What type of garbage can you throw overboard on inland waters? Nothing can be thrown overboard.

What should you do when fueling an outboard boat with a portable tank quizlet?

Secure the boat to the fueling dock and ensure that the engine has been turned off. Unload any portable fuel tanks and have your passengers step off the boat and onto the dock. This will help keep the boat stable and minimize the likelihood of spills.

What does a yellow buoy mark?

For those who are paddling or boating on intercoastal waterways, yellow buoys are used to designate a channel. When someone sees a yellow square, this is a sign that they need to keep the buoy to the port side. On the other hand, yellow triangles should stay to the starboard side of the boater.

What safety precaution should you take when fueling a gas powered boat?

While filling the fuel tank: Keep the nozzle of the fuel-pump hose in solid contact with the tank opening to prevent producing a static spark. Use caution and fill the tank slowly to avoid spilling fuel into the boat’s bilge or into the water. Use an oil-absorbent pad to catch drips or spills.

What should you do after fueling your pleasure craft and before starting the engine?

Wipe up any spilled fuel and properly dispose of the used paper towels or rags on shore. Open all windows, ports, doors, and other openings. If your pleasure craft is equipped with a power ventilation system (exhaust blower), turn it on for at least four minutes before starting your engine.

When fueling your boat What should you remember to use reserve tank?

Remember to run the system for at least four full minutes before starting your engine. Finally, remember that any portable fuel tanks need to be filled, while off of the boat, to ensure stable footing. Make sure to fill these tanks in a well-ventilated area with no flames or electrical equipment nearby.

What is the important safety information found on a boat’s capacity plate?

Look for a capacity plate near the operator’s position or on the transom of the boat. This plate indicates the maximum weight capacity and/or the maximum number of people that the boat can carry safely in good weather.

What should you do first if your boat runs aground quizlet?

What should you do if you run aground? Stop the engine and check on your passengers, when that’s done you should assess your boat’s hull for any damage. If there is damage, flag down another boat for a tow or radio for assistance. If there is no damage, try to get your boat loose.

What is the first action required of a boat operator who is involved in a boating accident?

An operator involved in a boating accident must: Stop his or her vessel immediately at the scene of the accident and Assist anyone injured or in danger from the accident, unless doing so would seriously endanger his or her own vessel or passengers and

What do you do after running aground?

If Your Boat Runs Aground
Don’t put the boat in reverse. Instead, stop the engine and lift the outdrive.Shift the weight to the area farthest away from the point of impact.Try to shove off from the rock, bottom, or reef with a paddle or boathook.Check to make sure your boat is not taking on water.

What is an important safety consideration when operating a personal watercraft PWC )?

Anyone riding on a PWC should wear a wetsuit or other clothing that provides similar protection. Also, keep everyone clear of the steering nozzle unless the PWC is shut off. Never exceed the manufacturer’s recommended capacity for your PWC. Know your limits, and ride according to your abilities.

What is the very first thing that you the operator should do if you discover that your powered pleasure craft is taking on water?

If the hole is on the water line, you must heel (incline the boat) the pleasure craft in order to get the crack out of the water.