What does valet button do?

The valet parking function secures the luggage compartment against unauthorised access. If you would like to have your Audi A4 parked, e.g. by service personnel, you can activate the valet parking function 1).

What does valet button do?

In essence, the key is intended for people to give to valets to park their cars or to repair shops to use. The valet key will open the car door and start the car but will prevent someone from unlocking the glove box or the trunk.

How do I get my Audi out of valet mode?

To turn valet mode off (remote start on) push the stalk on the left side of the steering column forward (toward front of vehicle) and up (towards roof). Hold down for 3 seconds (parking lights will flash).

How do I turn on valet mode on my Audi?

To activate the valet parking function, press the VALET button. The LED in the button will light up. Lock the glove box with the emergency key.

When the valet parking function is on, the following buttons are deactivated:
switch on the driver s door.button on the remote control key.Release catch on the boot lid.

How do I know if my car is in valet mode?

Hold down the brake.Cycle the vehicle key in the ignition between the ‘On’ and ‘Off’ positions 5 times.Do not touch anything on the remote.You will know that you have entered valet mode if you see the parking lights flash one time and/or you hear a faint click from within the dash.

How do I get my Audi A4 out of valet mode?

How to Exit Valet Mode
Insert your vehicle’s key into the ignition and turn to the “ON/RUN” position. Do not crank the engine.Press and release the LOCK and TRUNK buttons (I & III) simultaneously. Remove the key from the ignition and attempt to remote start your vehicle.

Where is the valet button?

Typical locations for valet switch: Under the driver’s side dash (mounted in the under-dash covering trim panel or wire-tied to a harness) Mounted in the driver’s side kick panel. Mounted in the steering column plastic housing.

What is the valet button on my remote?

The valet button or switch permits the owner to temporarily bypass the alarm functionality of the system. To enter or exit valet mode, disarm the system with a working transmitter, your personalized manual override code, or using the procedure below which is to enter or exit valet mode.

What does valet mean in Audi q7?

The valet button on my car is inside the glove compartment. The way it works is that you are supposed to lock the glove compartment and seats and then remove the mechanical key from the fob and only give the fob to the valet person.