kitchen sink strainer wrench, check these out | What tool do you use to tighten a sink drain?

What tool do you use to tighten a sink drain?

A basin wrench has a pivoting gripping head that sits at the end of a long handle, and it is designed to reach up into that awkward, inaccessible space behind a sink to tighten or loosen the mounting nuts on a faucet or the flexible supply tube nuts that connect to the end of the faucet tailpieces.

What is a strainer nut wrench?

Product Overview. Husky’s 12 in. adjustable Lock Nut Wrench tightens and removes sink strainer lock nuts on strainer baskets. The spring-loaded jaw automatically adjusts to fit most sink strainer lock nuts. The long handle allows access to hard-to-reach nuts while the dual-material cushion grip provides user comfort.

What can I use instead of a basin wrench?

If a basin wrench is not available at home, you might have socket wrench available in your toolbox. You will need a ratchet spanner, and you might need screwdrivers, channel lock pliers, a clean cloth, and water pump pliers as well. You may also use a sink drain wrench if you have one.

How do you remove a locking nut from a kitchen sink?

Cut the nut off with a hacksaw. Cut diagonally through the soft metal or the plastic of the locknut. Pull it off once the edge has been breached. Alternatively, if you are not going to use the drain basket again, place the hacksaw blade between the locknut and the sink proper and saw through the drain basket.

How do you stop a sink strainer from turning?

To keep the sink strainer from turning, insert either a special basket strainer wrench (photo above) or needle nose pliers (photo to right) into the strainer opening. Once the strainer locknut is loose, unscrew it by hand and remove the tailpiece and nylon washer.

What is a kitchen sink drain?

A sink drains by way of several components. Kitchen sinks have a strainer fitted into a strainer body that’s inserted down through the sink hole and sealed to the sink with a bead of plumber’s putty. Beneath the sink, the strainer body connects to the drain’s tailpiece and the rest of the drain plumbing.

How do you measure a kitchen sink strainer basket?

How to Measure a Sink Drain Opening for a Crumb Cup
Measure the drain opening across its widest part. This gives you the diameter of the drain circle.Insert the end of the measuring tape into the drain, beside the edge. Note the measurements on a piece of paper and take them with you when you shop for a crumb cup.