how to measure for a fireplace screen, check these out | What size should my fireplace screen be?

What size should my fireplace screen be?

To ensure you have about an inch or more of overlap for the screen at the face of the fireplace opening, choose a screen that is at least one inch taller than the height and two inches wider than the width of the fireplace opening for a safe, attractive fit.

How do you measure for a mesh fireplace screen?

When ordering both a Rod and Valance Kit and a screen choose a screen size 2 inches (5.1 cm) shorter than the height of your fireplace opening. For example, if the height of your fireplace opening is 25 inches and you subtract 2 inches for the valance, then you would need a 23 inch screen.

Does a fireplace screen need to cover the entire opening?

For wood-burning fireplaces, the screen should be flush with the opening of the firebox or built into the opening. This avoids any sparks popping out of the top, sides or bottom of the fireplace opening. If the fireplace is gas-burning, the screens are not a necessity and do not need to cover the entire opening.

Do fireplace screens come in different sizes?

The two screen sizes most commonly available are 39” wide by 31” high and 44” wide by 33” high. If your fireplace opening will not fit in the range of those two sizes, you may consider getting a custom screen made to precisely fit your opening.

How do you measure a fireplace screen door?

Measure the width of the opening at the top and again at the bottom. We need the minimum width. See figure 1. Next, measure the height of the opening from the hearth (where the enclosure will sit) to both the bottom of the lintel bar, and to the bottom of the finishing material (brick, marble, etc.)

What is the safest fireplace screen?

The Pottery Barn Classic Triple Screen (view at Pottery Barn) is our top pick since it is made of pounded cast iron for stability and durability. It features three wire mesh panels and a center opening with doors, giving you easy access to the fireplace while guarding against sparks and embers.

What is best mesh size for fireplace screen?

The most popular woven wire mesh used in fireplace screens is a mesh that has an opening size of approximately 1/10” and a percentage of open area of 60%. This clear opening size, in conjunction with the standard diameter wire, offers an ideal combination of spark retention, heat protection and visibility.

Do glass fireplace screens block heat?

Both screens and doors provide an extra layer of protection from either the hot glass of a gas fireplace or the burning logs of a wood-burning fireplace. If you have a wood-burning fireplace, a fireplace screen will also block burning embers from getting in your room and potentially starting a fire.

Do you need a fireplace screen with gas logs?

Jim says the answer is YES. While they are not necessary to prevent sparks and burning logs from escaping OUT into your room, some gas log manufacturers do require the use of a screen with their product. This is largely to prevent any flammable object from going INTO your fireplace.

Can you put a fireplace screen in front of a gas fireplace?

Fireplace screens can be found as either freestanding screens or be installed directly to the front of the fireplace or stove. However, attaching an aftermarket screen directly to the fireplace may change its functionality.

How big should a fireplace fire be?

Depending on how you choose to build your fire, four to six logs should be sufficient in creating a warm, long-lasting fire in your fireplace. If your fireplace is tall, then you can stack more if there is room.

Where is Northline Express located?

We have 75 staff and operate from over 100,000 square feet of warehouse, shipping and offices in New Stanton PA and Sparks, NV.