How much oil does a WRX take?

The 2013 Subaru WRX uses SAE 5w-30 viscosity, fully synthetic motor oil in itS3. 5 liter engine. The vehicle has an oil capacity of 5.5 US quarts.

How much oil does a WRX take?

2018 subaru wrx with Fa20DIT engine oil capacity with filter change is 5.4Qt of 5w30 synthetic oil. If filter is not being replaced capacity is reduced to 5.2Qt.

How many quarts does a WRX take?

Capacity: 5.4 quarts (with filter)After refill check oil level.

What oil does 2013 Subaru WRX take?

Subaru WRX 2013, SAE 5W-30 Conventional Motor Oil, 1 Quart by ACDelco®.

How much oil does 02 WRX take?

SAE 5W-30 is preferred. Capacity: 4.8 quarts. . (with filter)After refill check oil level.

What oil does a Subaru WRX take?

Fits WRX (2011 – 2017)

Recommended especially for turbo-charged engines, Genuine Subaru Certified 5W-30 Synthetic Motor Oil provides superior protection against oil breakdown for cleaner running and long engine life. 5W-30 synthetic motor oil is required for 2011 and newer turbo-charged Subaru vehicles.

What oil does a 2015 WRX take?

Engine Oil

SAE 5W-30 Synthetic oil is required. If SAE 5W-30 Synthetic oil is not available, SAE 5W-40 conventional oil may be used. However, it must be replaced with SAE 5W-30 Synthetic oil at the next oil change.

How much oil does 2008 WRX take?

Per the 2008 WRX STI Service Manual, the capacity of engine oil when replacing the engine oil and filter is 4.5 US quarts.

How much oil does a 5.4 Triton take?

Fluid Capacities

The engine coolant capacity of the Triton is 21.2 quarts. Including the filter, the crankcase holds 7 quarts of oil. Ford recommends using synthetic blend oil with a weight of 5W-20. The standard fuel tank holds 27.0 gallons of gasoline.

What oil does a 2016 WRX take?

Engine Oil

SAE 5W-30 Synthetic oil is required. If SAE 5W-30 Synthetic oil is not available, SAE 5W-40 conventional oil may be used. However, it must be replaced with SAE 5W-30 Synthetic oil at the next oil change.

How much oil does a 2016 WRX take?

A 2016 Subaru WRX transmission flush also uses about 10 quarts of fluid to completely clean and flush out the system.

What type of oil does a 2017 WRX take?

2017 subaru WRX Oil 5W30 Synthetic. Synthetic 5W 30 Oil QT. Quantity Required: 4.4 – SOA427V1410 – Genuine subaru Part.

How much oil does a 2011 Subaru WRX take?

Engine Oil

4.4 quarts. . (with filter)After refill check oil level. Torque: 32.5 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt.

What is 0W-20 engine oil?

What Does 0W-20 Oil Mean? 0W-20 is a winter viscosity multigrade SAE oil that provides excellent cold start performance and lubricates your engine parts in colder temperatures. 0W-20 oil is very thin in cold temperature climates, so it flows very easily without causing a lot of friction.