How long before rain can Thompson Water Seal?

Coverage will vary depending on the texture and porosity of the surface to being treated. DRYING TIME Thompson’s Water Seal should be dry in 2 hours under normal conditions.

How long before rain can Thompson Water Seal?

Surfaces must be thoroughly cleaned prior to application with a deck cleaner (like those in the Thompson’s® WaterSeal® cleaner line) applied according to label directions and cautions. If surface is damp or wet from cleaning or weather, allow the surface to dry thoroughly (a minimum of 48 hours) before application.

How long does wood sealer take to dry before rain?

While latex or water-based stain will be dry in about 4 to 6 hours, your freshly stained deck needs at least 24-48 hours before it rains. Oil-based stains that usually dry in about 12 to 24 hours will require a minimum of 48 hours before the rain.

Can you apply water seal in the rain?

If you get it applied before it rains, then it will seal wood. If it rains heavily, the product will dry cloudy on the surface but still work.

Can Thompson’s Water Seal be applied to wet wood?

Thompson’s® WaterSeal® Waterproofing Stains can be applied to damp wood, so you only have to wait about two hours to begin applying stain. Some of our other products require that the wood dry for 48 hours before applying a deck coating.

What happens if it rains on a freshly oiled deck?

Stains and oils penetrate wood best when it’s cool and dry. If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat.

What if it rains after sealing deck?

If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. This will result in a splotchy surface rather than an even tone. If it rains right after you apply the stain, the stain will peel and flake off.

How long does it take Thompson’s water Seal and stain to dry?

Under normal conditions, Thompson’s® WaterSeal® Waterproofing Stain – Semi-Transparent should dry to the touch within 2 hours.

When can you walk on Thompson water Seal?

How long before you can walk on Thompson Water Seal? Surfaces coated with Thompson’s water seal should be dry in about 24 hours. That is all the time you need to wait before you can walk on the sealed surface if you followed the application instructions correctly.

Does Thompson’s water Seal dry clear?

Product will appear milky white during application, but will dry clear. If puddling of product occurs, remove within 15 minutes by redistributing to dry areas or wiping off. Tackiness will result if over-applied. May also occur after application if overnight temperature falls below 40°F within 48 hours of application.