fitting bitumen roof sheets, check these out | What is the best way to cut bitumen roof sheets?

What is the best way to cut bitumen roof sheets?

When cutting along the length of corrugated bitumen sheets, it is recommended to use a coarse bladed saw or Stanley knife. For width wise cutting, use either a circular saw or coarse bladed saw instead. If you are working with a more complex shape, tin snips provide better control over the cut.

Can you walk on corrugated bitumen sheets?

Working on roofs can be a hazardous operation. Personnel should walk on roofs only if this is absolutely necessary, and should use planks or ladders laid flat and supported by the roof purlins, in order to carry out maintenance and related work.

Are bitumen roof sheets any good?

Durability – Bitumen is very durable, and unlike the other roofing sheet options can often look better as it weathers in the eyes of many. It can resist impacts fairly well, yet it is incredibly easy to cut to size. Bitumen is nearly always corrugated, which helps to resist impacts as well as easily shed water.

Can you cut bitumen roof sheets?

When cutting along corrugated bitumen sheets you can either use a Stanley knife or a course bladed saw. Alternatively, cutting across the panels will require either a course bladed saw or a circular power saw.

Can I cut corrugated roofing panels?

There are several ways to cut corrugated metal. Use a circular saw to make long, straight cuts in thicker sheets of metal. Use a pair of snips if you want to avoid power tools altogether and are working with thinner, more flexible metal or need to make curved cuts.

How do you cut bitumen?

To make long, straight cuts, it’s most effective to use a circular saw equipped with a diamond blade. For shorter cuts or cuts that aren’t straight, the easiest way to do it is by using an electric chipping hammer to cut away the parts of the asphalt that you want to remove.

How much should a corrugated roof overlap?

Corrugated sheeting should always overlap by a minimum of one corrugation, this can be known as side laps. When overlapping corrugated sheeting its advised you use cladco lapping tape. For maximum sheet lengths in corrugated, we can supply 5m in a 0.5mm thickness and up to 6m length in the 0.7mm thickness.

Which sheet is best for roofing?

Foam backed polycarbonate and clear polycarbonate roofing options are the most commonly used types of polycarbonate sheets.
Foam-backed polycarbonate roof sheets are lightweight and durable. Clear polycarbonate sheets are installed in patios, sunrooms and places that need natural light through the roof.

How long does a bitumen roof last?

The average lifespan of a bitumen roof is 10-15 years.

How strong is bitumen corrugated roofing sheets?

The sheets provide an excellent dimensional stability and in time develop a full intense colouring through the natural oxidation of the bitumen. The sheets are extremely light and flexible whilst still incredibly strong. They are resistant to external agents and acids and are 100% asbestos free.

Is bitumen corrugated roofing waterproof?

When combined with the tough corrugated form factor, the bitumen fibres used on corrugated bitumen sheets provide you with a waterproof and durable roofing solution.

How much should roof sheets overlap?

The product must be overlapped at the sides, not less than 1.5 corrugations. It is generally considered good practice to use fasteners along side-laps; however, when cladding is supported as indicated in maximum support spacings, side-lap fasteners are not usually needed for strength.

How far should purlins be spaced?

The maximum distance between purlins is five (5) feet on center. If your building site is in a region that is prone to heavy snow loads or high winds, then we may place your purlins closer together for added strength.