Can I hide my cable box and still use a remote?

Will My Remote Work (If I Hide My Cable Box)?

As long as you’re within range of your cable box, your remote should work fine. Most Bluetooth devices will work up to 30 feet away and RF can go a bit farther.

How do I keep my cable box hidden?

How to hide a cable box
Step 1: Placing the boxes. If your TV is fixed in one position once it’s mounted, you’ll need to install all of your soon-to-be-hidden hardware before you hang the TV. Step 2: Place velcro. Step 3: Install power strip. Step 4:Install infrared repeater. Step 5: Wrap wires.

Does cable box have to be visible?

Many cable boxes use IR / Infrared which is a strong signal that can bounce off of walls, like a laser pointer. Line of sight is not required as long as there are semi-reflective surfaces (i.e. walls) near the cable box.

Can you hide Xfinity box behind TV?

If you have an Xfinity X1 main TV Box or Player, you can use the XR2/XR5 remote control with Aim Anywhere control (RF capability) even if they are stored in a closet or another room, up to 50 feet away. To avoid this, disconnect the IR Extender from the TV Box when you’re not using it.

Can I Velcro a cable box behind TV?

The easiest place to hide a cable box is on the back of your wall mounted TV. We’d recommend using VELCRO庐 Brand Heavy Duty Strips to secure it in place – they can hold up to 7kg per 50 x 100mm strip so they’ll provide a secure, long-term hold.

Will my remote work through a cupboard?

There are two types of remote controls: infrared (IR) or radio frequency (RF). RF remotes don’t need a clear path to the component. The radio waves can penetrate walls and cabinet doors. RF remotes are expensive, and few stereos or video components use them.

How can I hide my cable box and wires behind my TV?

How to Hide Your TV Wires Without Cutting Into Your Walls
Use Cord Clips to Hide Your Wires Behind a TV Stand.Use Zip Ties to Keep Your Wires from Touching the Floor.Use a Cable Management Box.Use a Wall Cord Raceway Kit.Hide Your TV Wires Inside a Baseboard Raceway.Use a Fabric Cord Concealer.

Where do you put your cable box when mounting TV on wall?

All you need is to put the cable box behind the TV and ask a friend to change channels. You can mount one side into a stud if it is possible. Make sure no to drill a pilot hole when you mount the stud. For creating holes into a stud you need to use a mounting screw since the 3/16鈥 drill bit seems too large.

Can you put a cable box in a cabinet?

Place your Cable Box out of Sight

With an IR Extender, you can put your cable box inside cabinets or other furniture near the TV.

How can I use cable box in another room?

You need to have a long cable(s) from where the cable box is to your TV. Run it across the floor, or through the walls to get it to the TV. If you want to control the cable box the remote control if infrared, must 鈥渟ee鈥 the TV, visible line of sight.

Is Xfinity remote IR or RF?

The Xfinity remote uses either RF (radio frequency) or IR (infrared) signals to control the Xfinity box. Control Center can only send IR to Xfinity STB (see IR Learning section below). IR signals require a direct “line of sight” to work properly.

Is Xfinity remote line of sight?

Your XFINITY Remote can be paired with the Aim Anywhere Adapter (also known as the XR8) allowing you to control your set-top box even when the device is placed out of line-of-sight (for example, in an entertainment center or behind your TV).