The Daily Insight.

Connected.Informed.Engaged.

updates

bus blind spots, check these out | What are blind spots on a bus?

By Jessica Wood

What are blind spots on a bus?

A blind spot is an area of the road outside the driver’s field of vision that cannot be seen in the rearview mirrors or through the windows. The taller and longer the vehicle, the bigger the blind spots.

Where are the blind spots on a truck and bus?

Bus or coach blind spots

As with the truck, a large triangular blind spot exists behind the bus, plus wedges extending left and right, and a wedge in front. The doors are usually glass so provide less of a blind spot than truck doors.

Where are the blind spots located around a school bus?

Front Danger Zone – The front danger zone extends a full 10 feet from the front of the school bus. This danger zone is also the most dangerous blind spot area, as the bus driver is unable to see a child walking inside this zone.

What is the cause of school bus blind spots?

Although buses have rearview mirrors, they aren’t large enough, nor powerful enough to extend the entire length of the cab. In addition to issues with depth perception, mirror visibility for transit buses is continuously obstructed by standing passengers—making it all but useless for seeing rear traffic.

Where is bus blind spot?

A blind spot is anywhere around the vehicle that the driver cannot see within the normal range of motion of their head, or by looking in the mirrors.

Do large trucks and buses have a shorter stopping distance?

Large trucks have longer stopping and starting distances. They take more space for turns and weigh more. When no signs are posted, these vehicles must be driven in the right traffic lane or as close as possible to the right edge of the roadway.

Does this diagram show all the blind spots that a truck driver has?

Does this diagram show all the blind spots that a truck driver has? Does this diagram show all the blind spots that a truck driver has? Correct. The blind spots are where the driver can’t see or would find it difficult to see.

How many blind spots does a heavy vehicle have?

There are four common blind spots that drivers may accidentally find themselves spending too much time in. While traffic conditions don’t allow for vehicles to remain outside of blind spots, knowing them can help drivers be more aware of a truck’s movement, so they’re ready for any situation.

What is the danger zone around a school bus?

WHAT IS THE DANGER ZONE AROUND A SCHOOL BUS? The danger zone is the space all around the school bus. It extends out 10 feet (10 giant steps) in all directions. The School Bus Driver can’t see in this zone.

What are the mirrors on a school bus called?

Convex mirrors are typically mounted on the left and ride sides of the bus. They are usually located just below the flat mirror. A certain amount of distortion occurs when looking into the convex mirrors. However, the benefit of the convex mirror is that it allows the driver to see a wider field of view.

What are convex mirrors on a bus?

The convex mirrors are located below the outside flat mirrors. They are used to monitor the left and right sides at a wide angle. They provide a view of traffic, clearances, and students at the side of the bus.

What color are all school buses painted?

According to the National Highway Traffic Safety Administration, “All school buses should … Be painted National School Bus Glossy Yellow, in accordance with the colorimetric specification of National Institute of Standards and Technology (NIST) Federal Standard No. 595a, Color 13432.”

What should you be looking for in your left flat mirror?

The left flat mirror

There are 3 main things the driver must be able to see: 1 inch of the tire, the rear tire and 200 feet behind the bus.

How many mirrors does a typical school bus have?

There are many more mirrors on a school bus than on a car. Buses have 7 mirrors; one interior rearview mirror and 6 external mirrors (3 to monitor each side.)

Do cars have blind spots?

All vehicles have blind spots. These are areas or zones on either side of a car that a driver cannot see when looking into the rearview or side-view mirrors. Blind spots are why a driver should always turn their head and check for cars before changing lanes.